How to use Activator D
One treatment. Once a month.
Step 1
Before you start, check
pH levels are between 6.8 and 7.2
Alkalinity levels are between 80 and 120 ppm
Chlorine and salt levels are at 0 ppm
Step 2
Application
Backwash your pool for 3 to 5 minutes, or until the water runs clear. Rinse the filter for 1 minute.
Disconnect the pool cleaner hose from the weir. Set the valve to filter (not circulate/bypass) and start the pool pump.
Pour both bottles into the weir. Do not pour directly into the pool. Allow the product to mix in.
Reconnect the pool cleaner hose and resume your normal pump and cleaning cycles.
Step 3
Ongoing maintenance
Backwash once a week
Keep your pool brushed and baskets clear
For first-time use on a very green or neglected pool, use a double dose
Not recommended for salt chlorinated pools
Activator D does not kill E. coli (found in human faeces). For extra protection against bacteria, especially with extensive pool use such as hotels, schools and public swimming pools: Add 1 cup of chlorine into the weir with the pump running on filter, starting 3 days after adding Activator D. Follow up once a week. Do not sprinkle chlorine directly into pool water - it works through the filters and will not register in pool water.